EXPLANATION OF ARTICLE NAMES

en_article_names
Rat_Abkuerzungen_EN
 
TECHNICAL CHAMBER DATA
 
CONE OPENING DN625 ACCORDING TO DIN 4034
on all ROMOLD DN 800 & DN 1000 PE chambers.
Steigstufen_02
EN 13101 and/or EN 14396: Corrosion-resistant climbing steps for accessible ROMOLD ND 800 and ND 1000 chambers are available ex-works. The stability corresponds to the requirements of the standard. The distance between the climbing steps is 250 mm. ATV-DVWK-A 157: The lowest climbing rung must have a clearance to the berm of >_ 250 mm and ≤ 500 mm. The anti-slip resistance is increased thanks to the profiled surface. If necessary, the climbing steps can also be removed.
Article names
DIN V 4034-1 and/or ATV-DVWK-A 157: Gradient ≤ 1:20.
Slope of channel The standard slope is at least 0,5%.
In the case of integrated side inlets (bottom forms 3 B and 5 B), the step between main channel and additional side is +1/2 D for hydraulic reasons. Taylormade configurations can be produced to meet customer requests. Soil jump with IPP 3 BL: 0cm Soil jump: with 3 B 80 and 5 B 80 + 1/2 D
rohranbindung
Version PP: As standard, femal sockets for connection of a PVC-pipe according to EN 1401, a PP-pipe according to EN 1852, vertical and horizontal flexibility +/- 3,75 °. Version PE ND 800 and ND 1000: As standard, PE spigots for connection via electrofusion sockets for PE pipes according to EN 12666/DIN 8074/75 or for connection via double socket for PVC pipes acc. to EN 1401 and PP pipes acc. to EN 1852. Version PE ND 500 and ND 625: As standard, in female socket design for connection of a PVC-pipe according to EN 1401 and a PP-pipe according to EN 1852 with ROMOLD inlet seal according to DIN 4060 and EN 681-1, vertical and horizontal flexibility.
Version PP: As standard, femal socket for connection of a PVC-pipe according to EN 1401, a PP-pipe according to EN 1852, vertical and horizontal flexibility +/- 3,75 °. Version PE ND 500, ND 625, ND 800 and ND 1000: As standard, PE spigots for connection via electrofusion socket for PE pipes acc. to EN 12666/ DIN 8074/75 or for connection via double socket for PVC pipes acc. to EN 14101 compliance and PP pipes acc. to EN 1852 compliance.